| CUTTING MATS & POUNDING BOARDS |
HAMMERS | MEASURING TOOLS | MISC |
|---|
CUTTING MATS & POUNDING BOARDS
| Order Code |
Tools | Price (inc VAT) |
|---|---|---|
CM4 |
 A4 size cutting mat. Triple layered mat with assorted notations and measurements on each side. Mat protects surfaces and grid pattern gives you straight lines when cutting. |
£4.00 (£4.80) |
CM3 |
 A3 size cutting mat. Triple layered mat with assorted notations and measurements on each side. Mat protects surfaces and grid pattern gives you straight lines when cutting. |
£7.50 (£9.00) |
CM2 |
 A2 size cutting mat. Triple layered mat with assorted notations and measurements on each side. Mat protects surfaces and grid pattern gives you straight lines when cutting. Shop purchase only - postage would be £9.60 on these. |
£11.25 (£13.50) |
BO1 |
 Pounding board - 22 x 16 cm x 7 mm. In assorted colours. Protects work surfaces when using slot / hole punches and strap end cutters. Also gives a firm surface for embossing and stamping work. |
£2.50 (£3.00) |
HAMMERS
| Order Code |
Tools | Price (inc VAT) |
|---|---|---|
T52 |
 A small lightweight wooden mallet - ideal for jobs where a light striking force is required. |
£3.33 (£4.00) |
T95 |
 Small weighted rawhide mallet - ideal for finer control when striking embossing tools. |
£10.75 (£12.90) |
T96 |
 Classic cobblers hammer - and a decent all round hammer too. RE-STOCKING |
£9.17 (£11.00) |
T97 |
 Thorex plastic handled craft hammer - 32 mm heads. Supplied with white (hard) and yellow (extra hard) nylon screw in heads. Heads are replaceable. |
£18.96 (£22.75) |
T97 H |
 Replacement screw in heads for T97 Available in White (hard) and Yellow (extra hard). |
£3.33 (£4.00) |
MEASURING TOOLS
| Order Code |
Tools | Price (inc VAT) |
|---|---|---|
T57 |
 12" / 30 cm steel safety ruler. The raised sides protect your fingers from any slips when cutting. Metric measurements on one side, Imperial on the other. |
£4.17 (£5.00) |
T58 |
 12" / 30 cm steel safety ruler. Lots of useful conversion info on the rear. |
£2.29 (£2.75) |
T108 |
 12" x 8" right angle steel ruler. Measure accurate right angles and use as guide when cutting with knives. |
£6.58 (£7.90) |
| T183 |
 Wing dividers - max width of 4" Useful for marking out borders on work, finding centre points and measuring. |
£9.17 (£11.00) |
MISC TOOLS
| Order Code |
Tools | Price (inc VAT) |
|---|---|---|
T203 |
 Mini anvil. 380 g anvil with two fixing holes. Flat area of 75 x 22 mm. Useful solid base for setting rivets, press studs etc. |
£5.00 (£6.00) |
T202 |
 Hole punch sharpening tool - restore the cutting edge of inner & outer faces of single hole punch tools. |
£21.66 (£26.00) |
T99 |
 Spring loaded steel mini clamps. Useful for holding work in place while stitching or gluing - vinyl coated tips to avoid marking work. 50 mm long - jaws open to 18 mm wide. |
£0.42 (£0.50) each £3.54 (£4.25) for 10 |
T173-P |
 Bone crease folder - used for folding and creasing work but also works well as a burnishing tool on leather edges and seams. It's made of bone - pointy at one end and round at the other. |
£5.25 (£6.30) |
| T170 |
 Large seam ripper - it is large and rips through stitched seams. |
£1.67 (£2.00) |
| SAND |
 3 pieces of Angelus sand paper - 14 x 11.5 cm in 400, 800 & 1500 grit. Can be used wet or dry - useful for sanding edges of sewn work before burnishing and also for sharpening edged tools. |
£2.50 (£3.00) |
| PENS |
 Limited remaining stock of our Xmas 2024 promo Le Prevo pens. Black ink comes out of one end and the other end is a touchscreen stylus. Which is nice. |
£2.08 (£2.50) |
Need some small pieces of veg tan leather to practice using your tools on?
See here
